Fire Elimination Demo
-
-
USA Fire Department in Plano, Texas
-
-
Diesel fuel was poured into a pan and then OSE II was applied
-
-
Once OSE II is applied to a fuel, you must wait until at least 3 minutes of time has elapsed
-
-
After 3 minutes has elapsed after applying OSE II to a fuel, the fuel can no longer be lighted
-
-
The fireman put the road torch directly on the diesel which had OSE II applied and it would not light
-
-
The fireman from Plano, Texas tried for some time to light the diesel which had OSE II applied and they were unsuccessful
-
-
A second test was run to see if the diesel would light by itself; it lit immediately
-
-
The fireman let the diesel burn out
-
-
Diesel fuel was then poured out on the concrete and OSE II was applied
-
-
Once OSE II was applied, the firemen waited 3 minutes
-
-
After 3 minutes had elapsed the fireman tried to light the diesel with OSE II applied to it
-
-
The fireman tried to light the liquid running off from the main spill area and it would not light
-
-
The firemen proved to themselves that OSE II eliminates the fire hazard associated with fuel spills
